Skip to main content
Asked a question recently

How do I integrate a custom torque installation with Bright Cluster Manager?

Where am I?

In Bright Computing, Inc. you can ask and answer questions and share your experience with others!

If you install torque using a path that is different from the standard BCM one, then you should carry out the following steps (BCM version should be >= 6.0):

  1.  Disable torque: wlm-setup -w torque -d
  2. Set the following parameters under the AdvancedConfig directive (see example at end) section of /cm/local/apps/cmd/etc/cmd.conf:
    • TorqueRoot - directory of torque installation (default: /cm/shared/apps/torque/current/);
    • TorqueServerSpool - server spool directory (default: /cm/shared/apps/torque/var/spool/);
    • TorqueMomSpool - mom spool directory (default: /cm/local/apps/torque/var/spool/).
  3. If you need to use init scripts different from the scripts provided by the Bright Computing torque package, then add the following parameters into your AdvancedConfig section:
    • TorqueServerService - a name of torque server service (default: torque_server);
    • TorqueMomService - a name of torque mom service (default: torque_mom);
    • TorqueSchedService - a name of torque scheduler service (default: torque_sched).
  4. Change $torqueroot value in /cm/local/apps/cmd/scripts/healthchecks/schedulers (for example, to "/usr/").
  5. Repeat the same for all nodes where torque is running and restart cmd service there.
  6. Enable torque: wlm-setup -w torque -e

Example of an AdvancedConfg section:
AdvancedConfig = {